Color modes, HDR and Apple Log

Rec.709, HDR, HLG and Apple Log / Apple Log 2 in MoviePro: requirements, Log View monitoring, and recording a baked Rec.709 or HDR conversion.

MoviePro 10.2November 2026 edition3 min read

Browse the manualColor modes and Apple Log
4.3

Color modes#

Choose the color mode in Settings › Video Format › Color Mode; the screen is headed Color Space. Rows the current codec or route cannot record are dimmed, and the footer says why.

ModeRequiresLimits
Rec.709 · 8-bitAny codec except ProRes.Most compatible. With ProRes it is recorded as 10-bit.
Rec.709 · 10-bitA device with 10-bit HDR formats; HEVC or ProRes.Not with H.264. With HEVC it records as 8-bit above 60 fps; ProRes stays 10-bit.
HDR · 10-bit (Dolby Vision)An HDR-capable device; HEVC or ProRes.View on an HDR display. With H.264, HLG HDR 8-bit is offered instead.
HLG HDR · 8-bitH.264.Captured as 10-bit HLG and saved as 8-bit H.264 with BT.2020 tags.
Apple Log · 10-bitA device with Apple Log formats.Not with H.264. A flat image for grading; use the matching color management in post.
Apple Log 2 · 10-bitA device with Apple Log 2 formats and iOS 26 or later.Not with H.264.

Log Look and Bake LUT

With Apple Log or Apple Log 2 selected, Log Look chooses the monitoring view: Original Log, Rec.709 or Rec.2100 HLG. An imported LUT selected in Pro's look menu takes the view's place, in any color mode. Bake LUT in recording records the selected look instead of the original, which is then not saved. Baking works for single-camera takes up to 60 fps. Dual Capture and ProRes RAW record without the look even with baking on. Use Log View Use your own LUTs

9.4

Use Log View#

12
FIG 9.7The look menu (1), opened with the LUT key (2) on an Apple Log format: the Log views, then imported LUTs and MIX. Rec.709 is selected, so the key reads 709.

Monitor a converted image and keep Log

  1. Choose Apple Log or Apple Log 2 under Settings › Video Format › Color Mode.
  2. In Log Look, choose Rec.709 or Rec.2100 HLG. Leave Bake LUT in recording off.
  3. Return to Pro. Tap the LUT key (2) beside Record, or the look chip at the top with iPhone upright, to change the view: Original Log, Rec.709 or Rec.2100 HLG. It reads LOG, 709 or HLG.

With baking off, the conversion affects the preview and the recorded file stays Log. Choose Original Log to see the unconverted image. The same menu lists your imported LUTs: Use your own LUTs.

9.5

Record a Log conversion#

FIG 9.8Choose the look in Pro; recording through it is turned on separately with Bake LUT in recording.

Record the converted image

  1. Before the take, select the converted look in Settings › Video Format › Color Mode › Log Look, or a LUT in Pro's look menu.
  2. Turn on Bake LUT in recording (in Log Look, or in Settings › Looks: it is one switch). Read the description below it.
  3. Record a short test and check the file and the receipt's look line, for example Rec.709 · baked.

A recorded conversion works for single-camera takes up to 60 fps. Dual Capture and ProRes RAW record Log even with baking on, with no conversion baked. The LUT key only selects the look; Bake LUT in recording decides whether takes record through it.